Model Boat Mayhem
Technical, Techniques, Hints, and Tips => BRUSHLESS Motors and Speed Controllers => Topic started by: debssnal on March 27, 2010, 08:50:22 pm
-
Hi everyone,
i was have a look on Giantcod for a motor for russ and found this.
http://www.giantcod.co.uk/xyh80100a-180kv-brushless-outrunner-7055-p-404968.html
Now what can we put this in ?????
At almost 9.4 H.P. (7000w) there must be something big out there to put it in.
Let me know what would you put this motor in
kind regards
Alan
-
Hey Alan !!
A pair of these could be the power plant I am looking for to fit into my 1/3rd scale Monster Mersey driving a pair of 8" diameter four blade props . {-) {-) {-)
Mike
-
Hi mike,
they would do the job.with two of them you would have almose 19HP.
Each motor is the same power out put of a 80cc petrol engine.
Would cost around £400 for two motors and ESC
Kind regards
Alan
-
Pay no attention to the power rating.
You can get get 6.8kW out these motors but it a 6.8kW motor it certainly is not.
-
Maybe these are more to your liking
http://www.robotcombat.com/products/ETK-ETEKBL250.html
Nick
-
You're all barking!! Mind you, a 100W Kenwood car stereo amp would be just the ticket for the engine sound FX, Mike...................... %)
FLJ
-
You're all barking!! Mind you, a 100W Kenwood car stereo amp would be just the ticket for the engine sound FX, Mike...................... %)
FLJ
Plus I would add a BIG pair of bass speakers just like the loonies in their little hatchbacks banging out the noise!! {-) {-) {-)