Model Boat Mayhem
Technical, Techniques, Hints, and Tips => DC Motors (Brushed) and Speed Controllers => Topic started by: Nordsee on October 21, 2010, 05:16:33 pm
-
I have a Rokraft 100 ESC in a boat I have just bought, but to me it seems that it is not delivering full power.Maximum revs , ie the motor doesn't accelerate anymore, happens at about half of stick throw. and that seems too slow. Can anyone advise me how to set one of these up? There are 2 screws to adjust speed and stop. Before I start to alter things some good tips would be appreciated!
-
HI Nordsee. Go to web site www.mscomposit.com. On the front page you can download instruction sheet for this speedo. The two slots will be one to centre the speed controller i/e with the throttle trim at neutral there should be no movement on the motor. Second slot will be to increase or decrees the speed at which the motor runs. Hope this helps.
Stan :-)) :-)) :-)) :-)) :-)) :-)) :-))