Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Working Vessels => Topic started by: tjones27 on January 03, 2011, 05:02:12 pm
-
hi, im looking at changing the standard prop that i got with the paula kit from the plastic one to a brass prop. but im spoilt for choice! ive been looking at raboesch but there are soo many different ones, could anyone please advise me on which one would suite the kit best. im running a speed 600 M4 on 7.2V with an ESC limit of 23A coninous drain.
im tempted to go for the 160 series but im not sure. {:-{
any help and advise would be greatly appreciated.
http://www.cornwallmodelboats.co.uk/acatalog/m4-raboesch.html
-
40mm 3 blade (Left Hand) brass with M4 thread.
http://www.prop-shop.co.uk/ (http://www.prop-shop.co.uk/) Cheaper by a long shot over the Raboesch
Job done :-))