Model Boat Mayhem
Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: tubby tomo on January 17, 2011, 10:56:57 am
-
hi Ive asked about running 4 graupner 900 on chit chat but no help i wanted to find out what speed controller to get as the amps would be high i would be the props would be 75mm 5 blade
-
Are we talking about Four motors ?
If so then an RSC would be needed for each one, so it's a question of maximum amps per motor, so I would start of with a 20 amp version fused to 15A for a trial.
Regards
Ken
-
hi ken yes 4 motors ken im not to bright on electrics what is RSC
-
Is it possible to bench test one motor connected to an ammeter?
Just connect it to a battery direct and squeeze the drive shaft between a cloth and watch the meter. (carefully watching the fingers eh!!)
You might be surprised as to how little amps you really need.
Ken
ps
I use Mark's 900 motors on 15A esc's
-
THANKS KEN ILL DO THAT :-)) PS WHEN YOU SAY MARKS MOTORS WHO ARE WE TALKING ABOUT
-
That will be http://marksmodelbits.ieasysite.com/index.html
-
thanks dicky i have just checked & hes out of stock thanks mate
-
Check out Actions site, Dave sells them.
http://www.action-electronics.co.uk/pdfs/MOTORS03.pdf