Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Seaport Tugs => Topic started by: hmsantrim on May 04, 2011, 08:21:14 pm
-
Hi.
Any dicky/henlong refurbishers replaced the as supplied steel deck fixing screws with non ferrous ones.
If you have where can I get some as mine are showing quite a bit of rust.
cheers Frank
-
I swapped mine out with stainless steel self tappers of the small size from my local hardware store ( flat head philips) 99p pack of 20 or you can use the m3 threaded nuts and bolts from rc cars, picked up in any local model shop i would imagine, there normally stainless or case hardened steel.