Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Yachts and Sail => Topic started by: slug on May 31, 2011, 07:13:17 pm
-
i am building a y2k and the plan states a 3/4 inch diameter mast looks a little thick? is this ok also where can i get small screw eyes for the rudder pins which are 2mm brass wire does one control the mainsail and jib as in a micro magic hoping you gents can help slug
-
No, that cannot be right what's the size of the boat?
-
sorry read plan wrong 5/8 is the sizex34" high i have some 1/2"which i think will do boat is 36x10" gaff rig thank you for your help slug
-
sorry read plan wrong
:-)) Sounds like my sort of mistake. My wife laughs at me. I spend hours carefully working out what I need for a job and then invariably come home from the shops with either twice what I needed or a half. >>:-(
-
Screw eyes from the local hardware store or online. They often be brassed, as opposed to brass, which may prove stronger.
I also use cotter pins for small connections, just drill a hole and glue them in after trimming.