Model Boat Mayhem - Forum

Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: andywright on June 04, 2011, 10:50:40 PM

Title: Action Electronics Noisey Thing.
Post by: andywright on June 04, 2011, 10:50:40 PM
Having problems putting new sounds on the Noisey Thing, when plugged in to the PC the program sample indicates the new start , run and stop sound, I download the new sounds, but the card in the boat doesn't change from the old sound, any body any ideas, or I'll have to phone Dave in working hours next week.
Andy
Title: Re: Action Electronics Noisey Thing.
Post by: Roadrunner on June 04, 2011, 10:58:07 PM
I have no experience with the noise think.. something i've never wanted was working sounds in a model, but Daves a very helpful chap im sure he can go over the issues with you over the phone  :-))
Title: Re: Action Electronics Noisey Thing.
Post by: tigertiger on June 05, 2011, 03:10:20 AM
Give Dave Action a  call. He is most helpful and may know exactly the issue.
Title: Re: Action Electronics Noisey Thing.
Post by: ACTion on June 05, 2011, 08:32:27 AM
Andy
I can only refer you to Page 36 et seq here:
http://www.action-electronics.co.uk/pdfs/P100%20Operating%20Manual%20Part%202.pdf (http://www.action-electronics.co.uk/pdfs/P100%20Operating%20Manual%20Part%202.pdf)
Dave M
Title: Re: Action Electronics Noisey Thing.
Post by: andywright on June 05, 2011, 08:45:20 PM
Dave M
Yes I've been reading that, will keep trying.

Andy