Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Working Vessels => Topic started by: mook on August 28, 2011, 04:22:09 pm
-
hi there i have been working on my billings mary ann now for one month havent got very far but its hard work building a plank on frame boat didnt think it was going to be this hard so far i have sorted out all the radio gear out that im going to run im going to be running it on 2.4 i have installed the servo and rudder i made some extra detail for the rudder out off brass :) i have installed the motor as well i have fitted a 385 5 pole mfa motor with a 25mm brass prop. i have cut out the deck for where my access is going to be as well. im just about to start the planking more than likely tomorrow really not looking forward to it but heres pics so far
(http://s1.postimage.org/gjcyjhhg/mary_ann3.jpg) (http://postimage.org/image/gjcyjhhg/)
(http://s1.postimage.org/gjthwyf8/photo.jpg) (http://postimage.org/image/gjthwyf8/)
(http://s1.postimage.org/gk042cec/mary_ann1.jpg) (http://postimage.org/image/gk042cec/)
(http://s1.postimage.org/gka1afd0/mary_ann_2.jpg) (http://postimage.org/image/gka1afd0/)
(http://s1.postimage.org/gkiaz5tw/mary_ann_4.jpg) (http://postimage.org/image/gkiaz5tw/)