Model Boat Mayhem
Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: gwa84 on September 04, 2011, 11:38:08 pm
-
hi ime wondering weather these lipo's would be suitable to power a speed700bb turbo this is my fers flurry into lipo and would like to get it right :-))
cheers peeps james :-))
http://www.ebay.co.uk/itm/140506483805?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
-
They have the discharge capacity to drive your 700 BB turbo, if your drawing more than 25 amps the motor is overloaded ok2
2.2 Ah capacity * 30 C (capacity) discharge = 66 amps,
I'm not sure whether buying direct from the DE Hobby King warehouse would be cheaper %)
Nick
-
cheers bud will give them a go its going in a planing hull and wanted to get the wight dawn from using 12 volt nims :-))
-
got them from Hobby King a fer bit cheaper and a few other thins to go with the got some low valtege alarms as i will be running them on standard speed controllers :-))
-
did you get a balance charger?
-
ye bud got the imax b6 so can charge pretty much anything :-))
-
This will work. But forward only ok2
http://www.astecmodels.co.uk/catalog/product_info.php?cPath=3_100&products_id=764