Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Pleasure boats, Sports, Race, Power and Leisure Boats: => Topic started by: hama on September 11, 2011, 07:35:07 am
-
:-)Hi just a quick update on the fwd cabin on my Hunstman is progressing
(http://s2.postimage.org/2ktz3mqas/P1020311.jpg) (http://postimage.org/image/2ktz3mqas/)
/the leftover teak from the decking came in handy for all the trim
(http://s2.postimage.org/2ku0r62sk/P1020312.jpg) (http://postimage.org/image/2ku0r62sk/)
The vinyl cussions should finish it off quite well I think O0
(http://s2.postimage.org/2ku2epfac/P1020314.jpg) (http://postimage.org/image/2ku2epfac/)
so, Its a mask off and ready to paint the cabin sides before I get too far ahead :}
-
Very nice I have not seen the cabin finished on one off these before.
peter
-
Thanks Peter I just wanted to try an authentic aproach to the cabin although it might get a wee bit tight aft for all the electrics etc %%
-
theres plenty of room aft for the electrics seadog, you shouldn't have any problems.It's looking good though. Alan
-
if you Google " Huntsman 28 sales" you will find plenty of internal pictures if you want any.
what batteries are you using ? and as has been said there is plenty of room for radio gear i got a valve set in one years ago with a gannet 15 cc.
peter
-
Thanks I used to work for FBM Marine in the late 80,s trough to 1999 and we had a 28 refitted by the apprentices namely "Momento" so i had the privelidge to see the progress on a daily basis i,m trying to get it as correct as i can but not all things are possible {:-{ we,ll just see how it goe,s lol
-
First of many coats for the cabin sides and transom :-)
(http://s4.postimage.org/1nc652wdg/P1020350.jpg) (http://postimage.org/image/1nc652wdg/)
(http://s4.postimage.org/1nchpubtw/P1020349.jpg) (http://postimage.org/image/1nchpubtw/)
I found Citroen admiral blue the closest match
(http://s4.postimage.org/1nd1kahr8/P1020348.jpg) (http://postimage.org/image/1nd1kahr8/)
Still a long way to go yet this is the part i dislike the most "Rubbing Down" <:(
-
Photo up-date :-)
(http://s4.postimage.org/22gn6k57o/P1020355.jpg) (http://postimage.org/image/22gn6k57o/)
(http://s4.postimage.org/22h22e9no/P1020356.jpg) (http://postimage.org/image/22h22e9no/)
(http://s4.postimage.org/22hfap1lw/P1020357.jpg) (http://postimage.org/image/22hfap1lw/)
-
It's looking great
Peter
-
looking very nice :-))
-
:-)Thanks for the nice comments guys the cabin cussions are ready, my first attept at upholstery {:-{its no easy and very sticky
(http://s4.postimage.org/ojq51oro/P1020361.jpg) (http://postimage.org/image/ojq51oro/)
(http://s4.postimage.org/ojrsl19g/P1020362.jpg) (http://postimage.org/image/ojrsl19g/)
(http://s4.postimage.org/ojyeqf8k/P1020363.jpg) (http://postimage.org/image/ojyeqf8k/)
The vinyl was actual cuttings from a full size huntsman and i have kept enough for the cockpit seats
-
Boat looking great inside looks Fabe wont belong before your afloat, my one is coming on nice as well,
I'm going to be making up the windows soon, how did you construct your ones they look nice are
they painted,
chombo :-)
-
:-)Hi the windows are made from 2mm Ally plate, i stuck two pieces together with double sided tape and cut them out in pairs so I had an inner and outer and 3mm perspex encased between the two. The widows were then just touched with a small drill to give the rivet head appearance :-))