Model Boat Mayhem - Forum

Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: gwa84 on September 17, 2011, 12:03:47 AM

Title: 11.4 v 3 cell lippo 50 aMP ESC AND A SPEED 700BB TERBO BUT WHAT PROP
Post by: gwa84 on September 17, 2011, 12:03:47 AM
hi all ime looking for a good starting point for a prop on the above set up in a 36 ich planing hull with a serfice prop eny help would be ace thanks  :-)) :}
Title: Re: 11.4 v 3 cell lippo 50 aMP ESC AND A SPEED 700BB TERBO BUT WHAT PROP
Post by: gwa84 on September 19, 2011, 03:48:00 PM
nobody have clew lol  :((
Title: Re: 11.4 v 3 cell lippo 50 aMP ESC AND A SPEED 700BB TERBO BUT WHAT PROP
Post by: MikeA on September 19, 2011, 05:42:42 PM
surface or submerged.
Title: Re: 11.4 v 3 cell lippo 50 aMP ESC AND A SPEED 700BB TERBO BUT WHAT PROP
Post by: andyn on September 19, 2011, 07:56:55 PM
45-50mm :-))

Andy.
Title: Re: 11.4 v 3 cell lippo 50 aMP ESC AND A SPEED 700BB TERBO BUT WHAT PROP
Post by: MikeA on September 19, 2011, 08:14:49 PM
ofgs missed the bit where it says for a surface prop.
gwa84 can you tell me how it works out as i like fast boats but cant be forking out for a brushless motor everytime.
Title: Re: 11.4 v 3 cell lippo 50 aMP ESC AND A SPEED 700BB TERBO BUT WHAT PROP
Post by: andyn on September 19, 2011, 08:33:13 PM
Brushless motors are on the whole cheaper than brushed now...
Title: Re: 11.4 v 3 cell lippo 50 aMP ESC AND A SPEED 700BB TERBO BUT WHAT PROP
Post by: gwa84 on September 19, 2011, 11:49:49 PM
ye i will let you know ime using the 700 because i already have it and the speed controller attached to it and have a hull i just pulled a 30 nitro from as its knakerd just wanted to have a play with electric in it