Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Seaport Tugs => Topic started by: over_powered84 on March 04, 2012, 01:28:40 pm
-
hey guys
i have a member in our club whos recently sunk their seaport but on taking it apart to dry it a wire popped off
hes wanting to keep it stock at the moment since it's for his young son
so i was wondering if any of you guys had a photos of the electronic board and where the wires go
-
Hi OP84,
Most Seaport captains took the cutters and rigourously removed all the stock wiring, before the boat even saw water...
But, if it's just the one wire, it shouldn't be too difficult to spot where it belongs, should it?
In what section is the loose wire? Some pictures would help.
Regards, Jan.
-
i thought it was an easy find too when i seen to sleanish point, seems i was wrong
i got it running but it seems it's bypassing the switch and running automatically, for a short while it still allowed the use of the transmitter for the rudder and motor but i havnt touched it since
-
... these any good?
-
Now you have all the wiring Diagrams, may We ask How did he sink it ?.