Model Boat Mayhem

Mess Deck: General Section => Tugs and Towing => Topic started by: huffy004 on May 22, 2012, 10:03:39 am

Title: Billings St Canute help with tow hook
Post by: huffy004 on May 22, 2012, 10:03:39 am

Hi,  I'm brand new to the Mayhem site and live in Nelson New Zealand.  I've been building the Billings St Canute on and off for the past two years and have been striding forward in recent months but have just been stumped by one of my next steps as there doesn't appear to be instructions or an image of how some parts go together.  I hope someone can help?  The parts are the pieces from the molding F 835 - pieces f, g and h.  Hopefully the photo shows these parts .. what I need help with is how they fit together or are used in the model?  Can anyone help, preferably with a good clear explanation or better still a photo of what you have done with these pieces...
Any assistance would be appreciated...
Cheers!

(http://s14.postimage.org/6ry1mjo2l/DSC_4551.jpg) (http://postimage.org/image/6ry1mjo2l/)

(http://s14.postimage.org/cu5od1cil/DSC_4553.jpg) (http://postimage.org/image/cu5od1cil/)

Title: Re: Billings St Canute help with tow hook
Post by: huffy004 on June 01, 2012, 08:31:17 am

Hi everyone,  it seems that I have found the answer to my own question at the following link... cheers!

http://home.online.no/~joande/hobby/Boat_Imgs_3/DSC_3063_WEB.JPG

Title: Re: Billings St Canute help with tow hook
Post by: lighterman on June 18, 2012, 07:12:59 pm

if you do a search for "monarch" towing hook on the web you may find some other help.

Title: Re: Billings St Canute help with tow hook
Post by: huffy004 on June 18, 2012, 08:37:42 pm

Thanks Lighterman - your suggestion is very helpful - cheers!