Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Submarines => Topic started by: BailingBen on June 11, 2012, 04:54:48 pm

Title: which way do plugs go into a micron receiver
Post by: BailingBen on June 11, 2012, 04:54:48 pm

title says it all   i dont want to blow it up help pls



                                                    thanks kk

Title: Re: which way do plugs go into a micron receiver
Post by: tobyker on June 11, 2012, 07:42:58 pm

Dunno but I have connected servos into  RXs the wrong way before now and nothing happened until I turned them around the right way. So you could be lucky!

Title: Re: which way do plugs go into a micron receiver
Post by: triumphjon on June 11, 2012, 08:13:49 pm

micron do still exist , & have a web site ! kk ive sent you pm on the other side !

Title: Re: which way do plugs go into a micron receiver
Post by: Andyn on June 11, 2012, 08:14:55 pm

The right way %)

It'll only work in on one way around, so don't worry about it. Usually, the signal lead is either up or towards the board.

Title: Re: which way do plugs go into a micron receiver
Post by: Subculture on June 11, 2012, 09:10:27 pm

You may find this site useful. It's run by the original founders of Micron-

http://myweb.tiscali.co.uk/norcimradiocontrol/

Title: Re: which way do plugs go into a micron receiver
Post by: triumphjon on June 11, 2012, 10:50:27 pm

thanks sub , thats a mind of interesting stuff on that site

Title: Re: which way do plugs go into a micron receiver
Post by: roycv on June 11, 2012, 11:12:35 pm

Hi KK I have just had a look at my Micron rx's and black is towards the case edge.  I have run a black marker pen on that side to remind me.

I changed my rx sockets for modern servo type connectors a couple of years ago.

I have had mine for about 25 years, they are 27 Megs FM.  Still got 3 pairs of crystals but my preferred choice is my Futaba M Tx with the Micron Rx.
regards Roy