Model Boat Mayhem

Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: ojays on July 18, 2012, 08:30:00 pm

Title: Italeri Schnellboot Build (esc)!!
Post by: ojays on July 18, 2012, 08:30:00 pm
Hi guys, I am going to have bow to your superior knowledge on a subject that is quite new to me.
I am not new to the modelling scene, however I am a novice to electric power, so hopefully any response would have to be idiot proof (me) ;)
I am pesently building the above in another thread, however I find some the electric side of things difficult to understand. (Re: speed controllers)
My model wil lbe powered with 3 Brushed Tornado 400 motors, a 3600 Nihm, and the props are scale 30mm course pitched.
Radio gear is a Planet 2.4G 6 channel system left over from my model gliding days.
My questions are:
1) Can I use 1 ESC or do I have to use 3 seperate ones (one per motor)?
2) If 3 are required how would they have to be connected to the reciever?
Hopefully some one out there can help me with this!
Thanks in advance
Gregg
Title: Re: Italeri Schnellboot Build (esc)!!
Post by: ACTion on July 18, 2012, 09:31:46 pm
Here's one option http://www.action-electronics.co.uk/pdfs/Italeri%20Schnellboot.pdf (http://www.action-electronics.co.uk/pdfs/Italeri%20Schnellboot.pdf)
DM
Title: Re: Italeri Schnellboot Build (esc)!!
Post by: rsm on July 19, 2012, 09:28:53 am
I used one esc and one battery to run three motors on my S-100 (www.modelboatmayhem.co.uk/forum/index.php?topic=26290.0).

Regards.
Title: Re: Italeri Schnellboot Build (esc)!!
Post by: ojays on August 06, 2012, 09:30:20 am
Thanks for all the replies guys, haven't made my mind up yet what route to go!

Gregg