Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Pleasure boats, Sports, Race, Power and Leisure Boats: => Topic started by: Chris67 on October 07, 2012, 12:24:06 pm
-
Hello !
After the Wave Tracker 35, here is the building of my new boat : Delta 54 a small luxury yacht inspired by Delta Powerboats 54' IPS Express
A yacht drawn by a friend of mine Abfil
(http://s9.postimage.org/d8u47oebf/1_Side_Run.jpg) (http://postimage.org/image/d8u47oebf/) (http://s11.postimage.org/3r2jln7sv/image.jpg) (http://postimage.org/image/3r2jln7sv/) (http://s13.postimage.org/nl1fump9f/110131115630535047560132.jpg) (http://postimage.org/image/nl1fump9f/)
Advancement of the building on my blog : http://yacht-modelisme-naval67.over-blog.com/pages/Realisation_du_DELTA_54-5956048.html
Chris67
-
Good evening
Two new images on the blog :
http://yacht-modelisme-naval67.over-blog.com/pages/Realisation_du_DELTA_54-5956048.html (http://yacht-modelisme-naval67.over-blog.com/pages/Realisation_du_DELTA_54-5956048.html)
(impossible to add image to post ; that's why I put the link of my blog)
Chris67
-
This is looking to be a great build, I look forward to further pics - how big is the model?
Wayne
-
Hello goBulawayo !
Scale : 1/18 - Length: approx 98cm - Width: approx 25cm - Heigth hull 15cm
http://www.yachtforums.com/features/t-review-delta-powerboats-54-ips-express-yacht-15368.html
Chris67
-
Great ambitious build! What propulsion are you going to use? Keep the updates coming!
Reece
-
Hello !
When I received the drawing plans from Abfil (a french member of that forum too), he proposes to use 2 Graupner Speed 600 / 7,2V.
If somebody suggest a different motorization to me .......
Abfil's blog : http://www.plansbateaux.net/home/
Chris67
-
Hello !
Photos of the hull finished
http://s17.postimage.org/596aamlcf/Delta_54_011.jpg
http://s11.postimage.org/4rqkjrx77/Delta_54_011a.jpg
Chris67
-
Great that's looking very nice
Wayne
-
Hello !
Boring of the hull for the installation of the jet drives
-
Hello !
Equiped with KMB jets Kamewa 28mm
-
Chris....I have no knowledge of model jet boat engine set up :D
1. I see you have access to each half of the coupling to loosen or remove the locking screws......but can you remove the two M4? hex nuts [@ 3.00 & 9.00 o'clock] between the motor & the bell housing & disengage the motor for :o maintenance?.........
2. Are each of the centre rods that lift the water exhaust flap...connected so both flaps open together?............or is this independent for steerage?........Derek
(http://www.modelboatmayhem.co.uk/forum/index.php?action=dlattach;topic=39917.0;attach=130286;image)
-
Sorry Chris......should have gone to the KMB jets Kamewa 28mm WEB site first :embarrassed: ....both questions well explained or discussed on the RC Groups thread & video......Derek
-
Hello !
New pictures ........
Jet drives installed and the building of the cabin
New URL address of my blog :
http://yachts-modelisme.jimdo.com
-
Hello !
Some pictures .........
-
Hello !
Working goes on ...