Model Boat Mayhem
Technical, Techniques, Hints, and Tips => Painting, Finishing and Care. => Topic started by: Jonty on May 20, 2007, 07:07:23 pm
-
Help!
Was just about to spray Plastikote onto Holts primer, when it occurred to me that they may not be compatible.
Anyone know the answer?
-
I dont know the answer so why not try it on a piece of scrap then tell US.
Bob
-
Paint can be a funny thing, with a mind of its own.
Today, I didn't like the colour brown on one of my shapes ( in the Humbrol range) and decided to repaint it over with Humbrol white.
Yes,, you've guessed it, the Bl**** lot curdled. :o
I shall be be more wary next time, and keep away from changing colours
Cheers...Ken
-
I know Halfords car paints do not like Humbrol Paint, you get a very nice crinkly effect from that.
The other Brian
-
Absoloutly no problem at all hte only problem is if you go the other way ie holts on plasticoat.What you have got to remember is not to use car paints ever again on top of teh plasticoat as it will react.Trust me on this one I should know as I am paintsprayer by trade ;)Stavros
-
Thanks, Stravros et al.
-
An old "painter and doper" once told me that the way to remember it was: "You put Salt on Chips (Synthetic on Cellulose), but not chips on salt".
Years ago this was straightforward. However now the trick is identifying which is the synthetic and which the cellulose!
Rick
-
Easy the enamel smells like house paint and the cellulose/acrylic is similar to pear drops stavros
-
I was told that it's the thinners in use that can cause problems - If you spray cellulose first, once it hits the surface of the thing your spraying, the thinning medium starts evaporating and the paint dries out. Once it's dry, it's just paint so you can then spray on top with enamal or acrylic. Going the other way - spraying enamel first and then spraying cellulose next - the thinning medium in the cellulose attackes the enamel paint as its drying - result: an attack of the crinkles. Here endeth the lesson. Stands well back ready to be flamed!!!!! ;D
Greebo
-
Easy the enamel smells like house paint and the cellulose/acrylic is similar to pear drops stavros
Unless you have no sense of smell!