Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Working Vessels => Topic started by: merseyferry on May 05, 2013, 09:31:20 pm

Title: Billing Samson 2 II
Post by: merseyferry on May 05, 2013, 09:31:20 pm

hello again lads  ,has any one any pics or plans of billings samson 11 ive tryed google theres only 3 pics and there not very clear  ,thanks ..pad

Title: Re: samson 11
Post by: Martin (Admin) on May 05, 2013, 10:41:00 pm

This one?



(http://www.modelboatmayhem.co.uk/forum/index.php?action=dlattach;topic=24313.0;attach=95423;image)

Title: Re: samson 11
Post by: merseyferry on May 06, 2013, 08:21:15 am

many many thanks martin  much appreciated  regards pad

Title: samson2 info
Post by: merseyferry on May 12, 2013, 08:18:53 am

apollogies for my lack of knowledge , has any one any knowledge on the billing samson2 when it was first out etc(what year) etc and what causes the motours to run eratically  ,do i need a new speed controler  etc ,regards pad

Title: Re: samson2 info
Post by: Arrow5 on May 12, 2013, 08:32:32 am

Don`t know the boat but number one problem is the proximity of the Rx to the motors, you couldn't find a worse place ! Get the Rx as far away from the motors as possible and route the antenna clear of them too.  Cant see any suppressors on the rear of the motors, are any fitted?  Modern speed controller(s) seems logical.  Have you a picture of the whole boat, just for interest?

Title: Re: samson2 info
Post by: mermod on May 12, 2013, 08:46:14 am

Is that the aerial wire laying directly on the motor? if so get that away from there at the very least.
 

Title: Re: samson2 info
Post by: merseyferry on May 12, 2013, 08:58:52 am

ps thought i posted 2 pics, ive moved areal ill try posting full ship , it wont let me ill try later some reason

Title: Re: samson2 info
Post by: Stavros on May 12, 2013, 09:05:27 am

If you have another ESC try it as the Hitech gold bricks wernt the most reliable
 
 
Dave