Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Yachts and Sail => Topic started by: philk on July 01, 2013, 11:18:36 pm

Title: help neede with m class rigging
Post by: philk on July 01, 2013, 11:18:36 pm
evening.
i have recently been given a rather old yacht which has m class written on it.
the rigging is a little old and heath robinson so could anybody send me a diagram or picture of how these should be rigged.

thanks phil
Title: Re: help neede with m class rigging
Post by: mrpenguin on July 01, 2013, 11:52:49 pm
Who is Heath Robinson?
Free Dictionary: "if a machine or system is Heath Robinson, it is very complicated in a way that is funny, but not practical or effective"
Hopefully your yacht will eventually avoid being Heath Robinson  :-)
 
Presumably it is a sloop with Bermuda rig.
A quick summary:
You should have a single mast just ahead of the keel fin, with a single jib in front of the mast and a mainsail behind.
There will be two or three shrouds each side of the mast, also a backstay from top of mast to the stern. There may be a forestay (from top of mast to bow), this is optional. The jib has a halyard from near mast top to the front of the jib boom. Jib boom is pivoted about 25% of its length from the bow. Most model yachts have a self tacking jib.
Sail winch controls both sails. The winch may be below deck or could be a continuous loop above deck, there are a few setup options.
Suggest you have a look at some pictures - Go to Google Images and search for "rc sailboat legend" - while the Legend is a cheap Chinese boat, the general rigging layout is typical of a great many rc sailboats and should give you the general idea.
 
Hope this gets you started...
 
Rigging may be done either with Dyneema or wire, depends on what you are planning....
For more specific areas, perhaps you could post a photo or two of what you have?
 
Title: Re: help neede with m class rigging
Post by: tigertiger on July 02, 2013, 04:16:42 am
Do a google search on 'vintage m class model yacht'.
There are links that I am unable to follow, sorry, due to the Great Firewall of China blocking almost everything for no apparent reason on some days.
Title: Re: help neede with m class rigging
Post by: mrpenguin on July 02, 2013, 04:32:32 am
Further to tigertiger's post, some nice video of one on the water... will give a general idea of the rig....
http://www.youtube.com/watch?v=YEmD4Ge1DYs&feature=player_detailpage (http://www.youtube.com/watch?v=YEmD4Ge1DYs&feature=player_detailpage)
 
Title: Re: help neede with m class rigging
Post by: pugwash on July 02, 2013, 09:20:02 am
Assuming  you are meaning M class yachts and not dinghies you will find some line
drawings and a couple of photos in the following link
 
Geoff
http://www.universalrule.com/index.php?page=1 (http://www.universalrule.com/index.php?page=1)
 
Title: Re: help neede with m class rigging
Post by: Netleyned on July 02, 2013, 09:46:19 am
Surely it is an old Marblehead.

Ned
Title: Re: help neede with m class rigging
Post by: rmaddock on July 02, 2013, 11:16:48 am
Who is Heath Robinson?


Heath Robinson was an artist who became famous for drawing weird and wonderful machines: http://en.wikipedia.org/wiki/W._Heath_Robinson