Model Boat Mayhem
Technical, Techniques, Hints, and Tips => DC Motors (Brushed) and Speed Controllers => Topic started by: Seacommander on October 18, 2013, 08:54:56 pm
-
Hello.
I've purchaed a very large Gentlemans Launch, Quite an old model and in nice conditon.
It's 54" long buy 14" wide and similar hull to Vosper Launch ect... I was thinking of puttingg a MFA 850 in it and a 40 Amp Mtronice controller.
I want / envisage moderate performance using a 12v Gel cel
But I would be 'very pleased' for alternative suggestions
Thanks
Mark
-
Ditch the 850 and the gell cell if you want performance let alone a decent run time.....stick a 900 series motor water cool it 55mm 2 bladed prop running on 2x12v stick packs and watch it fly and get at least 30mins running time as opposed to around 8 esc an action one
Dave