Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Bait Boats => Topic started by: jonrogers on September 08, 2014, 04:40:44 pm
-
new to this site. hoping someone can help me.
I have a Jabo mk 1 bait boat which i bought brand new working fine till it stopped working checked the small main board and the main chip is fried. been looking on replacing with a new receiver and radio heres the link http://www.hobbyking.co.uk/hobbyking/store/__9041__Hobby_King_2_4Ghz_6Ch_Tx_Rx_V2_Mode_1_.html (http://www.hobbyking.co.uk/hobbyking/store/__9041__Hobby_King_2_4Ghz_6Ch_Tx_Rx_V2_Mode_1_.html)
its a 6 channel radio. just to help you out the bait boat runs off two motors so i was going to use the two axils to control the motors up on both forward let one down or the other to turn then the two switches on the top for lights and to drop bait. now my problem is speed controls and esc what do i need to run the boat it has a 12v 4200ah battery also might sound silly as i already think i know i will need two speed controls for each motor. HELP!!! THANKS.