Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Working vessels R&D: => Topic started by: Buster22 on November 07, 2014, 12:51:32 am
-
Had a question don't see in plans but abs hull do I cut that down to the molded line it's maybe half inch on rear and goes to like 1 and half inch on sides also what is a good glue to use on abs hull for wood to plastic thanks for the help
-
I would first fit the deck to its marked location & then cut away the hull flush to the deck level, that's how I did mine & it worked fine. There is a faint line on the hull as well but it is not too clear. Mick B.