Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Yachts and Sail => Topic started by: boaterjim on December 16, 2014, 08:41:59 pm

Title: Fiesta Yacht sheeting
Post by: boaterjim on December 16, 2014, 08:41:59 pm

Can anyone help me with my Fiesta Yacht Sheeting problem?
Can anyone tell me which servo is used for the Fiesta yacht sheeting. Also the way that the routing of the jib and main sheeting is carried out to achieve the correct operation and range of movement of the jib and main booms.
A sketch or drawing would be useful.
thanks
Jim
l

Title: Re: Fiesta Yacht sheeting
Post by: Netleyned on December 17, 2014, 09:17:22 am

Hi Jim,
I think you said you hope to race your Fiesta when finished.
Will you be racing at a club?
Looking at other boats will be the best way of getting the best
out of it.
Most other owners will point you in the right direction.
Join the Fiesta Owners Association. I think its still free.
You will probably be able to get a copy of the original
instructions from one of the members.
Unless a fellow Mayhemmer has a set  O0 O0


Ned

Title: Re: Fiesta Yacht sheeting
Post by: radiojoe on December 17, 2014, 03:39:24 pm

hi Jim, I don't know if you've tried this site https://fiestayachts.wikispaces.com/ if not you should be able to get all the info you want, :-))  Joe

Title: Re: Fiesta Yacht sheeting
Post by: boaterjim on December 17, 2014, 06:22:44 pm

 See I told you all, model boat mayhem is great, thanks Joe, just the info I need. :-))
 thanks again Joe
Jim