Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Steam => Topic started by: kiwimodeller on January 27, 2015, 08:33:01 am

Title: Size of typical Windermere launch
Post by: kiwimodeller on January 27, 2015, 08:33:01 am

Greetings all, I am hoping for some information about the size of a typical full size Windermere steam launch. I have a launch based on a Sovereign Models hull called Lady Sarah and with cabins approximately copied from the Miranda plans. The hull is about 43" long but without knowing what length the original boat was it is difficult to work out what scale she is and therefore what figures to order to suit. Any help appreciated.

Title: Re: Size of typical Windermere launch
Post by: frazer heslop on January 27, 2015, 09:03:41 am

These links may help
http://www.nationalhistoricships.org.uk/register/81/waterlily (http://www.nationalhistoricships.org.uk/register/81/waterlily)
http://www.steamboatassociation.co.uk/page-1117882
Have a look for Otto,Branksome and Shamrock
best wishes
frazer

Title: Re: Size of typical Windermere launch
Post by: morley bill 1 on January 27, 2015, 11:10:47 am

hi if you google windermere steamboat museum it will give you some good links  regards Bill...

Title: Re: Size of typical Windermere launch
Post by: grendel on January 27, 2015, 12:51:17 pm

measure the doorways and figure them at about 6 foot 6 inches (or 2m ) tall.
Grendel

Title: Re: Size of typical Windermere launch
Post by: kiwimodeller on January 29, 2015, 08:22:20 am

All great suggestions and most helpful. Thanks, Ian.

Title: Re: Size of typical Windermere launch
Post by: John R Haynes on March 29, 2015, 02:19:35 pm

I surveyed 6 of the windermere boats many years ago as they were slipped for winter overhaul. Branksome was 54.5ft long and 10ft wide

Title: Re: Size of typical Windermere launch
Post by: kiwimodeller on March 30, 2015, 10:08:08 am

Thanks John, if I remember correctly something that I read several years ago Branksome was one of the largest of the Windermere boats. Is this your reccollection? Thanks, Ian.

Title: Re: Size of typical Windermere launch
Post by: John R Haynes on March 30, 2015, 10:19:40 am

Yes , it was the largest.
 I have just checked my survey notes on Branksome and see that the length was in fact 50ft and beam 9ft. Think the plans I measured before posting to you [ that are half the scale of my original drawings ]have not been reduced accurately

Title: Re: Size of typical Windermere launch
Post by: kiwimodeller on March 31, 2015, 09:59:56 am

Thanks for your help, it seems that at 43" the hull might possibly be at 1:12 scale (43ft original) as a 1:16 scale would mean that the prototype would have to be 57ft and I have not found any mentioon of Windermere boats that big. I can borrow a 1:12 crewman to check against the doorways etc. Again, thanks for the help. Regards, Ian.

Title: Re: Size of typical Windermere launch
Post by: John R Haynes on March 31, 2015, 01:01:29 pm

Branksome was biggest . Why not stick to standard ship model scales , 1/192 1/96 1/72  1/48 1/24

Title: Re: Size of typical Windermere launch
Post by: tony52 on March 31, 2015, 10:35:44 pm

Osprey of 1902 was 45' long, 8' beam - Swallow of 1911 was 45' 6" long, 8' beam - Viper of 1907 was 42'6", 7' beam. Your thoughts of 1:12 scale would be in order with these steam launches.

Title: Re: Size of typical Windermere launch
Post by: steamboatmodel on April 01, 2015, 01:27:27 pm

With the proliferation of Doll house Iteams in 1/12 scale it is the ideal size for our live steam launches.
Regards,
Gerald.

Title: Re: Size of typical Windermere launch
Post by: sparkey on April 01, 2015, 01:41:22 pm

 %) I used 1/12 scale victorian dolls house figures in my steam Alexandria perfectly in scale ,looks great just need some nice calm weather to sail it,Ray Sparkes. 

Title: Re: Size of typical Windermere launch
Post by: kiwimodeller on April 02, 2015, 09:43:58 am

Thanks very much for all the help and suggestions.

Title: Re: Size of typical Windermere launch
Post by: annie on February 04, 2018, 05:31:30 pm

Hi - my brother was one of the apprentices who rebuilt Waterlily at Vosper Thornycroft.  My other brothers and sisters would like to get him a momento for his 60th birthday.  Can anyone help ?  Are there any small models available of this launch, or one very similar ??
Many thanks