Model Boat Mayhem

Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: david48 on March 06, 2015, 10:44:08 am

Title: Output TB3 on P102(building Fairmount Alpine)
Post by: david48 on March 06, 2015, 10:44:08 am

I have got back to my build and I am fitting the second P 93 for the stern thruster control am I right in thinking I can use output TB3. There is a P95 before the thruster. If  I can not use this output what is my next /best option . Is it possible to put in another P102 in parralel if necessary .
Thanks for the help
David

Title: Re: Output TB3 on P102(building Fairmount Alpine)
Post by: inertia on March 06, 2015, 11:46:49 am

David
I'm curious to know why you think there would be a problem here. Can you say what items you already have connected to P102 and into which sets of terminals?
Dave M

Title: Re: Output TB3 on P102(building Fairmount Alpine)
Post by: david48 on March 06, 2015, 02:56:51 pm

Hi Dave
Thanks for the reply it is wired up as per the Fairmount Alpine wiring diagram as you have drawn it on the drawing as far as I am aware  now I have sought in my mind TB3 feeds a P91 as there is no P91 I thought I might be able to use that .I am useing TB2 toP94, TB4 to P94 that's port and starboard motors ,TB6 to bow thruster and TB5 to P101 and decoder .
There has been no power supplied to the circuit yet.
Thank you for the help ,have you put the Teak to use yet .
David

Title: Re: Output TB3 on P102(building Fairmount Alpine)
Post by: inertia on March 06, 2015, 06:29:48 pm

Should be no problem.
Teak has been used......................many thanks - it looks great!

Title: Re: Output TB3 on P102(building Fairmount Alpine)
Post by: david48 on March 06, 2015, 07:28:59 pm

Hi Dave
Thank you for that just needed a confidance booster . Your build looks very good
David