Model Boat Mayhem

Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: newbe7 on June 07, 2015, 06:08:00 pm

Title: action electronics
Post by: newbe7 on June 07, 2015, 06:08:00 pm

I'm looking at action components for the slipway tug Yorkshireman are there wiring harnesses needed to connect each unit or just wire if wire what gauge is needed are there other components to compare with action.
Rick

Title: Re: action electronics
Post by: Martin (Admin) on June 07, 2015, 06:20:34 pm

 
Try:  http://www.action-electronics.co.uk/pdfs/Slipway%20Dutch%20Courage.pdf

Title: Re: action electronics
Post by: inertia on June 07, 2015, 06:50:44 pm

All of the wires connecting the power board to the various units are 14 or 16AWG silicon-covered multi-stranded cable from Component Shop. http://www.componentshop.co.uk/cable/silicon-cables/14-awg (http://www.componentshop.co.uk/cable/silicon-cables/14-awg)  The thinner wires with plugs on their ends come attached to the units already.
You can compare any other manufacturer's items with ACTion's as long as you wish, but you'll not find anything like the P93, P94 or P95 in any other range.
DM

Title: Re: action electronics
Post by: newbe7 on June 07, 2015, 09:53:24 pm

Thank you for the replies I felt the same way when I looked at the Action units and being a new comer to r/c I guess I needed a second thought on them.
Again Thanks
 Rick