Model Boat Mayhem

Mess Deck: General Section => Chit-Chat => Topic started by: BFSMP on September 08, 2016, 05:35:40 pm

Title: antique plates
Post by: BFSMP on September 08, 2016, 05:35:40 pm
does anyone on here know anything about old plates such as delft wear especially delft blue plates.

I have always been interested in old things and I bought three old plates some years ago, and wonder just how old they are.

If anyone knows anything about such things I will take some photos of the three plates and put them on here, but will have to root through a box to find them.

Thank you.

Jim.
Title: Re: antique plates
Post by: nemesis on September 08, 2016, 05:53:34 pm
See what is on the back, that is where the info "should "be, nemesis
Title: Re: antique plates
Post by: BFSMP on September 08, 2016, 05:58:25 pm
i'll find them out and put photos on.

Jim.
Title: Re: antique plates
Post by: BFSMP on September 08, 2016, 06:25:39 pm
first one plus reverse.......absolutely no defining marks......also might add all three plates are cracked and/or repaired.
Title: Re: antique plates
Post by: BFSMP on September 08, 2016, 06:27:02 pm
second one, two defining marks on underside.
Title: Re: antique plates
Post by: BFSMP on September 08, 2016, 06:28:32 pm
third one same as second but with three defining marks on underside.
Title: Re: antique plates
Post by: BFSMP on September 08, 2016, 06:29:31 pm
Any ideas anyone.

Jim.
Title: Re: antique plates
Post by: furball on September 08, 2016, 09:10:34 pm
Just Goooogling around...


Quote
Your plates were made by Keeling & Co in North Staffordshire.

Dale Hole, an large pottery works, was established by Joseph Stubbs in 1790, hence the 1790 date used in the maker stamp. In 1843 the works were taken over by by XXXXX XXXXX and Joshua Mayer, the names and owners changed over the years, with a Mayers family member involved in each new iteration.

Keeling & Co took over in 1886 and remained so until 1936.

The words Late Mayers is a device used by Keeling & Co to pay homage to the previous owners and establish that the quality and standard of the earthenware was that of what the Mayers used.


Chatsworth is the pattern name.


Hope this helps.


Cheers, Lance
Title: Re: antique plates
Post by: BFSMP on September 08, 2016, 09:16:31 pm
Thank you Lance.

Much appreciated and very interesting........and not what I have thought all this time.

Jim.