Model Boat Mayhem
Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: foreender on November 12, 2016, 06:39:44 am
-
my memory switch does not power out when the led lights up,can this be repaired,or is it the recycle bin >>:-(
-
Is this happening on both switches?
Can you hear the relays clicking?
Regards
Jonathan
-
yes, the relays are working,but no power out.
-
Dumb question here. Have you got power connected into the relays?
DM
-
Relays clicking is a good sign - that suggests that the Robbe Duo board is working in relation to being powered and receiving the signal from the RX.
I am sure you know that effectively each "switch" is made up of 2 parts (seperate circuits) - the middle man seperating the 2 electrically but also joining the 2 physiically is the relay.
Can you desribe what you have on the relay side - cable connected from and to, power supplied from , switching lights, sound, pump etc and we maybe able to point to in the right direction as to a fix...
May be a pic would help...
Regards
Jonathan
-
Oops, never thought to check the cartridge fuse, it looked ok, forgot its on a separate circuit.Thanks chaps, red face again Aye, Bill.
-
Bill,
Pleased you solved the problem
We have all been there at one time or another!
I once went to replace the power supply in a computer - as I came to remove the "dead" item someone had added an "on/off " switch on the back of the case that I swear was never there - a simple click and the "dead" power supply amazingly came back to life.... I am amazed that I did not spot it, how it got switched off in the first place I will never know...
To this day I have the new replacement power supply, never fitted, smiling at me from it's place on a shelf in my den...
Regards
Jonathan