Model Boat Mayhem
Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: Barnet on January 05, 2017, 07:56:23 pm
-
Hello Ill be attempting to retrofit / install my first sound module in a tug soon and I as the tug was built the terminals of the motors are not easily accessible - can I attach the correct wires to the correct wires of the motors or do they have to be connected to the motors' terminals as the instructions say?
-
you can connect to the cables that go to the motor anywhere between the Esc and the motor
Dave
-
This should not be a problem.But if you feel you need assurance then contact M Troniks they are very good and do not mind you calling them.
Stan.