Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Lifeboats => Topic started by: bobgrimward on January 11, 2017, 03:14:17 pm
-
Hi Guys,
I am just about to start a speedline Severn and I have decided to fit brushless motors but I have never used them before so I am looking for some advise.
What motors would you recommend and speed controllers to suit. What batteries would I need to drive them, can you use lead acid as I have a few in stock.
I would appreciate any advise you can give and where would be the best place to purchase them.
Many thanks in advance. %% %% %%
-
Hi Bob
I have fitted 2 Turnigy D3536/9 910KV motors with Turnigy Aquastar 100 amp speed controllers driving Prop Shop 2222 scale props 55mm 5 bladed. The motors and esc are from Hobbyking.
Hope this helps.
-
Hi Bob,
I have a 1/16th Severn and might find the time to start it one day. I will fit two Tornado Thumper motors paired with two Fusion hawk 60 amp speed controllers. Battery wise I tend to use individual 11.1 volt 5000mAh Lipo's
http://www.overlander.co.uk/tornado-thumper-v3-4260-06-500kv-brushless-outrunner-rc-motor.html
http://www.wheelspinmodels.co.uk/i/85116/
Whilst it may not be the cheapest option I have used this combination in several boats and it has been very successful. All items are readily available from UK suppliers.
Shaun
-
Hi,
Tend to use Turnigy D3536/6 1250KV Brushless Outrunners and HobbyKing 60A Boat ESC 4A UBEC on for all my 1/16th Lifeboats always been impressed with scale speed.
:-))
-
Hi Shaun,
Huge difference in cost compared with Turnigy - is it worth it?
Thanks
-
I agree with you in regards to the cost Jeff, but I have several boats with this motor, ESC configuration and none of them have given me any problems at all. the big plus is they are available within a day or two in the UK and the ESC'S work on English as opposed to Chinese amps.
Shaun
-
Hi Shaun,
Thanks for the info on motors.
Any idea how the thumper would go with jet drives? I have a Shannon to build too.
Thanks
-
Hi Jeff,
Join the club, I hope to also have a Shannon to build. I am having mine from Speedline and my understanding is that they will be supplied with a brushless motor for each of the jet drives.
Regards Shaun
-
Hi Shaun,
Yes, correct. I have since found out motors will be supplied.
Thanks
Kind regards
Jeff