Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Working Vessels => Topic started by: The Old Fart on April 19, 2017, 06:37:15 pm
-
Hi Guys,
I'm looking for a radar motor for my ModelSlipway 1:16 Tamar Class Lifeboat.
also the blue rotating light.
Thanks
Dave
-
Hi Dave
I have used Components Shop Micro-w worm drive £3.95 and the minature DC Voltage controller £2.50 on my 1/16th Severn. I machined a blue light cover from perspex with a blue flashing LED from them, I could not find a
commercial light fitting to scale.
-
Hi,
Same here on both Tamar and Severn works really well.
Rich
-
does that fit in the radar houseing?
gantry will raise and lower.
-
It does on the Severn.
-
HI Dave just a picture showing mine in a small box not sure of details on your model hope this helps. Just checked with Component -Shop sadly this item is out of stock.
Stan.
-
Thanks Stan,
that looks good,
Yes they are out of stock, ordered from ebay.
Dave
-
I wonder... with the current availbility of micro servos and the ability to convert one to continuous rotation, would a servo slowing device still work with one and allow the "dialing in" of speed for the perfect radar set up?
Jonathan
-
Could always use a micro stepper ( would need circuit to provide stepper steps)
http://www.ebay.co.uk/itm/Micro-2-Phase-4-Wire-Stepper-Motor-6-5-6MM-Micro-Mini-Stepper-Motor-with-Rod-DIY-/252631646907?hash=item3ad20502bb:g:TgoAAOSwImRYJTpB
Dave I bet you could even fit an ATTiny or Pic chip in the same box
-
Dave,
Have a look here for the rotating light
There is various types available, they are for 1/16 Trucks
https://en.fechtner-modellbau.de/fahrzeug-komponenten/beleuchtung/rundum-leuchten/blaulicht/?p=1 (https://en.fechtner-modellbau.de/fahrzeug-komponenten/beleuchtung/rundum-leuchten/blaulicht/?p=1)
Adam