Model Boat Mayhem
Technical, Techniques, Hints, and Tips => Batteries & Chargers => Topic started by: jaymac on May 27, 2017, 10:09:02 am
-
After finishing charging one Batt the next one threw up a ''Connection error check main port'' tried another batt and the same error all the reading prior to pushing the start button are normal except battery resistance says no battery found? these are batts that are regularly used charged/discharged anyone any suggestions please
-
Either increase the charging current or decrease it mine does the same
Dave
-
Thanks Dave but not work for me
Jay
-
mine did this, found that one of the plugs had become unsolder to the board. resolder it and its been fine since.
-
Thanks that is what I am worried about may have to bite the bullet and a have a shufti. Puzzling thing is on battery testing it shows it ok but on battery resistance it says no battery found
-
Yippee Sorted :-)) twas the Deans connector the lead was snapped off under the heat shrink should have checked that lead first but having all the Readings threw me .Of course they come via the balancing plug silly me. should've remembered the old adage 'When up to your Ass in alligators first drain the swamp''
Thanks to all for their input
Jay