Model Boat Mayhem
Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: Glyn Roberts on September 28, 2017, 04:28:54 pm
-
Is it OK to run 2 servo's from 1 bec lead. I have two water cannons on fire boat and want to run them in tandem. The servo's will be aiming the cannons.
Regards Glyn
-
Yes it is
Dave
-
Provided the BEC can handle the load, yes. Considering what else might be powered from the same source, most BECs will be OK, more modern UBECs can supply a heavier load. Most servos you can guess at wanting to pull about 0.5 amps each max. Is it the same BEC supplying the receiver?
-
Its only the same as the aero boys having 2 aileron servos paired, just make sure that nothing is binding adding to the loaded servos
Mark
-
Thanks for response Guys, I was making sure that there were no hidden pitfalls.
Regards Glyn