Model Boat Mayhem

Technical, Techniques, Hints, and Tips => BRUSHLESS Motors and Speed Controllers => Topic started by: jaymac on October 19, 2017, 01:08:43 pm

Title: suitable replacement outrunner for Airboat
Post by: jaymac on October 19, 2017, 01:08:43 pm

problem again with my airboat this time methinks the motor is Kaput no movement and a wee bit of smoke.Looking for a suitable replacement for a Hyperion HP-Z3007-20.this was running on a 9x6 prop and specs are below am looking for similar albeit cheaper any suggestions please


Operating voltage: 2s – 3s LiPo
[/size]Max. eff. Current: 25 – 28 A[/color]
[/size]Peak current: 32 (30 s)[/color]
[/size]KV (rpm/V): 1580[/color]
[/size]Used Regulator: Phoenix 45, Software 1.54 (Timing: standard)[/color]
[/size]Stator Diam. (mm): 30[/color]
[/size]Stator Length (mm): 07[/color]
[/size]Outside Diameter (mm): 37[/color]
[/size]Length (mm): 31.8[/color]
[/size]Output Shaft Diameter (mm): 4[/color]
[/size]Mount Screw Diameter (mm): 3[/color]

Title: Re: suitable replacement outrunner for Airboat
Post by: ChrisF on October 20, 2017, 10:46:23 pm

Turnigy and Leopard are makes that have been recommended to me with the latter being available from the Component Shop for one.

I've decided to give an Overlander a try (Overlander Batteries) and as they are primarily designed for aircraft would suit your use.

Have a look at both web-sites for what matches your requirements.