Model Boat Mayhem
Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: Onetenor on March 22, 2018, 11:36:23 pm
-
Any ideas how to shift the black lurg from wires
-
If you mean a black gunky build up on the plastic sleeves of wires, I use soap and water to wet a cloth. If the connections are all sound I wrap the cloth round the wire, squeeze with my fingers and pull the wire through, and repeat several times. I just avoid getting components wet. You could also use white spirit, and gentle rubbing if things are more fragile.
If you mean something else, please elaborate.
-
See:
http://www.modelboatmayhem.co.uk/forum/index.php/topic,50467.msg515430.html#msg515430
http://www.modelboatmayhem.co.uk/forum/index.php/topic,31006.msg307211.html#msg307211
http://www.modelboatmayhem.co.uk/forum/index.php/topic,54395.msg562915.html#msg562915
-
If it is inside the plastic vables and on the wire itself strip it out and start again
Dave