Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Lifeboats => Topic started by: The Old Fart on July 02, 2018, 07:18:08 am
-
Hi Guys,
I'm in need of a bit of guidance please.
Aldeburgh life boat the James Cable Rother class 1st launched June 8th 1982
How is the rudder connected to a servo ?
Part built boat came without building instructions.
Thanks
Dave
-
Hi Dave,
Back in 2012, tt1 did an excellent build thread of the Metcalf Rother kit, which included lots of detailed photos. I have posted a few of them here (which i hope tt1 won't mind), together with a link to the original thread.
http://www.modelboatmayhem.co.uk/forum/index.php/topic,35283.25.html
Hope this helps. It's actually given me some ideas on how to setup my own rudder linkage.
Charlie
-
Thank you Charlie, I'll pass this on.
-
So it's not your build then Dave?
-
I'm fitting out all the electrics for a club member.
Rudder servo was the initial head scratching session. Expect will need to make a 3D print holder for this servo.
-
While your at it on the 3D Printer then, any chance you can knock up a 1:15 version of the Whitemetal Mounting Bracket? :}