Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Working Vessels => Topic started by: nmbrook on January 06, 2019, 03:09:59 pm

Title: Seabex One diving bell
Post by: nmbrook on January 06, 2019, 03:09:59 pm

Hi all,I have several pics of the diving bell,but do not have any pics of the diving bell mated to the decompression chamber.Both have flanged tubes that mate to form a tunnel for the divers to crawl through but I have no info as to what sort of clamp hold the two units together to form a pressure tight seal.I would be grateful for any help


Regards


Nigel

Title: Re: Seabex One diving bell
Post by: nmbrook on January 06, 2019, 04:38:31 pm

A change of tack searching images has produced two pics to give me some ideas.I was struggling as most images show the bell mated to the decompression chamber so you can't see the clamp system.Found these two pics which give me an idea of what I can represent in 1/75.


Regards


Nigel

Title: Re: Seabex One diving bell
Post by: RST on January 10, 2019, 10:02:13 pm

Sorry Nigel, I think I repied to your other post about Seabex One in general.  I gave a brain dump of things on her sister and some pointers for research about old Comex DSV's, a link to the old Comex society with allot of pics and videos also.
Richard