Model Boat Mayhem
Technical, Techniques, Hints, and Tips => Radio Equipment => Topic started by: essexbill on March 03, 2019, 08:10:05 am
-
Hi.
Looking at the Turnigy X9 radio set does anyone use one of these please ?
Interested in hearing peoples comments.
Thanks.
-
Lots of reviews on YouTube Bill dating as far back as 2010
Been around a long time so there me be some improvements in those years
-
Hi
I have the X9r pro, just wish I know how to use all the program, I would think that you must be able to use all of the functions in one form or another.
All in all I have found it to be a good system and you can get the RX in the U.K so you do not have to go to Lobbying.
Fred
-
Thanks for your comments guys.
-
in all honesty, your money would be better spent on a FrSky Qx7.
-
Hi.
Looking for some help if possible.
I want to use one of the rotary knobs on the top for a throttle control for something but cannot figure out how to set this up .
Cheers everyone
-
Hi
I always use the live chat on Hobby King, for any help with mine.
-
Set up channels 5 to 9
pick a channel and assign a switch to it
https://youtu.be/YHMDW0TDIZc (https://youtu.be/YHMDW0TDIZc)
-
Thanks Andy.
Its simple when you know where to find the info.
-
Hi.
I have gone through the bind process with different radios over the years so have a good idea of how to do it.
With the Turnigy 9x my result is failure, I have read the manual watched a couple of clips on YouTube but no success.
Plug in the bind plug and power, hold in the bind button on the transmitter and turn it on. All I get is the same flashing light on the receiver I had before I turned the transmitter on.
Please people what am I missing? /
-
Are you too close
-
the bind directions for the 9x and its receiver are bad... on the receiver the plugs labeled "bind" and "bat" are backwards.
start watching the following youtube video at the 2 minute mark:
https://www.youtube.com/watch?v=AW2H3sHpKX0
-
Hi, I had the same Problems today O0 and found out that I mixed the bind port with the battery port >:-o
did it the Right way and it's working. :}
Before I was quiet sure I did all in the correct way.
Sven
-
Are you too close?
Tried it several times even from 6 feet away.
-
Hi, I had the same Problems today O0 and found out that I mixed the bind port with the battery port >:-o
did it the Right way and it's working. :}
Before I was quite sure I did all in the correct way.
Sven
Thanks for your comment , did you use the first port for the battery or bind plug as the markings on the RX are really poor?
-
look at the video tsenecal posted