Model Boat Mayhem

The Shipyard ( Dry Dock ): Builds & Questions => Lifeboats => Topic started by: Flundle (Speedline Models) on May 08, 2019, 03:53:29 pm

Title: Speedline Shannon kits
Post by: Flundle (Speedline Models) on May 08, 2019, 03:53:29 pm
Just to remind you folks that Speedline produce a 1/12th scale and a 1/16th scale Shannon. Apart from their size, the two kits are identical.
The kits are complete with very near scale jet drives (approved by Hamilton themselves) which come complete with brushless outrunner motors.
The workable trim tabs are to scale and are mounted in the same way as the full size with scale ram cylinders concealing the servo's push rods.
The wheelhouse is part of the deck so the whole lot can be lifted off to give fill access to the interior of the hull.
A huge bag of cast resin fittings includes the flying bridge and the mast. All aerials are carbon fibre.
Its a complete kit and everything fits.
Its very scale with an acurateley proportioned wheelhouse and deck