Model Boat Mayhem
Technical, Techniques, Hints, and Tips => The "Black Arts!" ( Electrics & Electronics ) => Topic started by: Skimmer Fan on June 15, 2019, 08:29:48 pm
-
I bought a humidifier with the intention of putting it into a boat but the connector was for a usb socket.
When I cut the socket off I thought it would be like telephone wire all separate wires.
It is actually 2 wires twisted together but they must have an insulating covering on the wire.
Does anybody know how I can remove the coating so it will take solder.
-
Try scraping it off with a scalp, or grip it between a sheet of fine abrasive paper and pull it one way only , it looks like the fine head phone wire I had to re solder , it worked ok for me .
David