Model Boat Mayhem - Forum

Mess Deck: General Section => Tugs and Towing => Topic started by: neptune on August 29, 2019, 04:22:39 AM

Title: Imara parts ID
Post by: neptune on August 29, 2019, 04:22:39 AM
I am building Caldercrafts Imara and need help to identify a couple of parts, any help would be appreciated,
  best regards John,
Title: Re: Imara parts ID
Post by: neptune on August 29, 2019, 04:26:14 AM
Second photo
Title: Re: Imara parts ID
Post by: neptune on August 29, 2019, 04:30:06 AM
This is the current state of the build,
Title: Re: Imara parts ID
Post by: john44 on August 29, 2019, 09:46:04 AM
Hi John, first picture, the tube goes onto the funnel at the front secured by the protruding
Leg, leg at the bottom fits under the ladder gantry center of the funnel.


Second picture, the mast cap in the center of the pic. Is glued to the top of the mast.


The other parts I haven't found yet


Hope this helps
John
Title: Re: Imara parts ID
Post by: john44 on August 29, 2019, 12:26:16 PM
Hi John, have you checked out the brilliant build log being done by tafelspitz on the Imari.
You will get a lot of info. From there.


John
Title: Re: Imara parts ID
Post by: neptune on August 29, 2019, 04:08:55 PM
Thanks for the quick replies John, I will have another look at the plans, yes I have been looking at that build, lots of info, thanks once again for the help,
  best regards john,