Model Boat Mayhem

Technical, Techniques, Hints, and Tips => DC Motors (Brushed) and Speed Controllers => Topic started by: pipercub1772 on December 10, 2019, 03:20:44 pm

Title: monoper super
Post by: pipercub1772 on December 10, 2019, 03:20:44 pm
Hi, help with monoperm super, is the rpm dependant on the amount of what i can only describe as individual blocks of gears by adding  or subtracted ,  i have a leaflet but its in German,kind regards Allan.
Title: Re: monoper super
Post by: chas on December 10, 2019, 10:59:35 pm
Hi, if I'm interpreting what you have written correctly, you have a Monoperm Super with the pile gearboxes. Each unit added, changed the gear ratio. So maximum revs without a gearbox, least revs and most torque with all the units attached.
My memory may be faulty, but I think it was 3/1 with 1 unit up to 360/1 with all attached.
Chas

Title: Re: monoper super
Post by: pipercub1772 on December 11, 2019, 10:15:54 am
Thanks for that information Chas it seems you are correct after  few experiments i did last night so thanks once again,kind regards Allan.