Model Boat Mayhem
Technical, Techniques, Hints, and Tips => DC Motors (Brushed) and Speed Controllers => Topic started by: Philbyuk on December 29, 2019, 04:20:35 am
-
Hi there all
i have got 3 fusion aqua power 128A esc's ( 1 for the bow thruster motor and the other 2 for the main motors )
the wires to the motors are coloured blue and white?
which is the positive one , and which goes to the negative side of the motor or doesn't it matter ?, slightly confused newb
-
Have you seen: https://www.modelboatmayhem.co.uk/forum/index.php?topic=42727.0
-
yes thanks , unfortunately that doesn't tell me which wire is which ..ie the blue and white one ,,which is pos and which is negative ,, or does it matter which goes to which apart from the direction of the prop
thanks
-
DOESNT matter. if motor is reversed simply swap over. normally i connect blue to red from motor, considering that red is connected to the motor side with the red dot on it!!
-
thank you very much, i suspected that, but just wanted to make sure