Model Boat Mayhem
Mess Deck: General Section => Model Boating => Topic started by: john44 on September 14, 2020, 07:24:58 pm
-
Hi guys, those of you who have converted a decoy duck to r.c.
What adhesive did you use to glue the prop shaft and motor mount in?
John
-
Rapid Araldite, Pete
-
Rapid Araldite, Pete
That is a surprise. Araldite in the FAQ say that Araldite doesn't bond polypropylene. Did you do more than just rough up the surface before gluing?
-
Just roughed up the surfaces. Did it 7 or 8 years ago, and still OK.
-
My choice would be bathroom sealant! It seems to stick to anything, although I have not tried a blanket yet.
regards
Roy
-
This is how a commercial company does a Duck:
http://www.vac-u-boat.com/Vacuduck.htm (http://www.vac-u-boat.com/Vacuduck.htm)
and an amateur version of the same basic idea:
https://www.rcgroups.com/forums/showthread.php?1161019-R-C-Duck&perpage=50 (https://www.rcgroups.com/forums/showthread.php?1161019-R-C-Duck&perpage=50)
alternatively might it be an idea to attach a plate to the bottom of the duck to get a larger contact area?
-
All sensible workable answers.
Duck Tape?
I expect the bathroom sealant will stick to blankets - it certainly stuck to an old, but servicable work shirt and left it with a corporals stripes.
-
My choice would be bathroom sealant! It seems to stick to anything, although I have not tried a blanket yet.
regards
Roy
Trust me Roy everything sticks to a blanket, %% {-)
Joe