Model Boat Mayhem
The Shipyard ( Dry Dock ): Builds & Questions => Working Vessels => Topic started by: Speed123 on July 08, 2021, 10:05:50 am
-
Hallo,
i have been working on the model for about one year and it is now nearly finished.
to share my experiences a video was created to summarize the important topics from the build including optimizing the Schottel drives or making the main winch operational.
https://youtu.be/rjgx8KsPeh0 (https://youtu.be/rjgx8KsPeh0)
As english is not my native language, please excuse any deficits.
Regards
Hans
-
Nice works Hans :-))
-
That's a very good video. Love your model too. :-))
Ralph
-
Hello,
last weekend a camera was mounted to the back of the wheelhouse, simulating the Skipper-view towards the working area and taking video-clips during the anchor-handling.
Getting the anchor into the water is still a bit tricky and needs further improvement.
Retrieving anchor and buoy however works fine.
But see yourself:
https://youtu.be/IHc66RT84Ls (https://youtu.be/IHc66RT84Ls)
Best Regards
Hans
-
excellent model and video thanks for posting Bill...
-
Nice Model and excellent video.
-
Hello,
after some search I found two real offshore buoys at "Shapeways" 3D printing service.
They look much better than the selfmade ones:
(https://www.modelboatmayhemimages.co.uk/images/2021/11/01/S3-06057HPG.jpg)
(https://www.modelboatmayhemimages.co.uk/images/2021/11/01/S3-06058HPG.jpg)
Unfortuneatly they are a bit too heavy to carry anchor and chain.
So far for remote handling the "Egg-Container"-version will still be used.
Best Regrads
Hans