Model Boat Mayhem
Mess Deck: General Section => Other Hobbies and Interests => Topic started by: tsenecal on December 18, 2021, 04:47:46 pm
-
Been spending the last few weeks working on a three part build. Finished the Tamiya King Hauler, modified by removing sleeper cab, added sound and lights, added remote release on fifth wheel, added a driver... then started on large lowboy trailer. this will be able to handle several of my model boats, including the 30" wellcraft scarab in the picture (part three of the initial build)... I also have a PBR, a 41' UTB and a 22" lobster boat in appropriate scale that will all have transportation cradles made so they can sit on the trailer.
(https://i.postimg.cc/PvbHM60G/20211031-151646.jpg) (https://postimg.cc/PvbHM60G)
(https://i.postimg.cc/fVqN5Sqb/20211130-213034.jpg) (https://postimg.cc/fVqN5Sqb)
-
Nice looking rig you have there :-))
Great adaptations for hauling your boats, like it mate.
-
Nice, where can I get new tyres for a tamiya ford rs 200 please ?
-
That's a 'Going to town Rig' and no mistake Tsenecal!
Off to look at 1:14th scale trucks now.
-
Nice, where can I get new tyres for a tamiya ford rs 200 please ?
I have no idea... i would suggest checking ebay
-
Started work on a second truck....
(https://i.postimg.cc/Cz86j7fY/20211212-200040.jpg) (https://postimg.cc/Cz86j7fY)
(https://i.postimg.cc/yJpPq3Sv/20211212-195924.jpg) (https://postimg.cc/yJpPq3Sv)
(https://i.postimg.cc/xJW38r5m/20211212-195933.jpg) (https://postimg.cc/xJW38r5m)
-
Nice builds, currently building a Grand Hauler with GT Power sound system..
https://youtu.be/uc2VfUwSL3U (https://youtu.be/uc2VfUwSL3U)
-
Some pics
-
Cab sprayed
-
Nice builds.
Chris
-
Nice builds, currently building a Grand Hauler with GT Power sound system..
https://youtu.be/uc2VfUwSL3U (https://youtu.be/uc2VfUwSL3U)
let me know what you think of the GT Power sound system. my King Hauler has the Lesu sound and lights, but i am trying to decide if i want to make a DIY or use the GT Power for the K100
-
a little more work on the K100 daycab single axle
(https://i.postimg.cc/HcjfmpR4/20211225-220411.jpg) (https://postimg.cc/HcjfmpR4)
-
let me know what you think of the GT Power sound system. my King Hauler has the Lesu sound and lights, but i am trying to decide if i want to make a DIY or use the GT Power for the K100
Must admit, the GT Power unit is spot on, the ability to use the handset or the app to control what lights are on or off is great.
-
More or less finished now apart from a few odd ends, will post some pics shortly..
-
Pics
-
I have two GT Power System, one is a plain lorry sound and lights and one that I think is advertised as the Truck Container Sound and Light system. personally I wouldn't buy the second one if it was the only unit on the market. Didn't work, went back to supplier who agreed it didn't work, they sent it to Perkins who said it did work, when it still didn't, and then had the nerve to try and charge me for the postage......no chance. I did get it working by joining two outputs together but never did get the vibration motor working. IMHO biggest waste of money for that particular unit.Perkins did try and blame me for using the wrong size battery and overcooking it, until I pointed out that their specification stated the voltage of the battery required and they even supplied the lead (lipo) for same. i.e.can't connect a two cell to a three cell plug!!!!
-
I have the lesu sound and lights set for the king hauler "w900" truck, but i am dealing with a very tiny amount of space in the single axle COE... i think i am only going to be able to fit a DIY version. I still have a globe liner waiting to be built, so i might try the GT Power in it.
-
Two options for you, both good sound output and the Ess dual speaker unit comes with usb stick so you can upload any engine noise you can download, this is is going in one of my lifeboats but sounds well in a truck also. The Trasped unit is more for cars/suv type vehicles, both from Bangood and took just over a week to be delivered.
-
I'd like to install sound at some point in my Unimog. Does that unit have any pre-installed sounds or are they readily available to download?
I'd want engine start up then proportional to speed.
Chris
-
Both units have pre installed sound, the Ess unit has big Diesel engine but you can download various onto this.
-
https://www.banggood.com/Sense-Innovations-ESS-DUAL-2-SPEAKERS-Engine-Sound-Simulator-For-Axial-SCX-10-II-WRAITH-Traxxas-TRX4-p-1205047.html?utm_source=googleshopping&utm_medium=cpc_organic&gmcCountry=GB&utm_content=minha&utm_campaign=minha-gb-en-pc¤cy=GBP&cur_warehouse=CN&createTmp=1&utm_source=googleshopping&utm_medium=cpc_bgs&utm_content=tanya&utm_campaign=tanya-ssc-gb-euw-all-0113&ad_id=491180619117&gclid=EAIaIQobChMIz9iOr_KQ9QIVlO3tCh2elgArEAQYASABEgJUYPD_BwE (https://www.banggood.com/Sense-Innovations-ESS-DUAL-2-SPEAKERS-Engine-Sound-Simulator-For-Axial-SCX-10-II-WRAITH-Traxxas-TRX4-p-1205047.html?utm_source=googleshopping&utm_medium=cpc_organic&gmcCountry=GB&utm_content=minha&utm_campaign=minha-gb-en-pc¤cy=GBP&cur_warehouse=CN&createTmp=1&utm_source=googleshopping&utm_medium=cpc_bgs&utm_content=tanya&utm_campaign=tanya-ssc-gb-euw-all-0113&ad_id=491180619117&gclid=EAIaIQobChMIz9iOr_KQ9QIVlO3tCh2elgArEAQYASABEgJUYPD_BwE)
-
Thanks for the info. and link. A reasonable price compared with some units.
Chris
-
I have the Sense ESS one in a boat, and have seen the Sense ESS dual... the ESS one is too big, and the dual is larger than the one. I will have to investigate the Trasped...
In the Kenworth k100, there really is very little space inside or underneath the cab to hide things. the receiver is in one gas tank, a 2000mah battery is in the other.
there is only about 15mm x 45mm x 45mm behind each seat inside the cab, and 55mm x 70mm x 15mm under the doghouse above the motor and servos. things will need to be thin to fit.
the DIY "thing" i am looking into is this one:
https://github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32
it is both sound and lights, and versions of it can be built as small as a stick of gum (plus the speaker)
-
Lovely Rigs chaps. I have always been a fan of COE's but like a nose now and again :}
-
I have been doing a little more work on the small Kenworth K100...
(https://i.postimg.cc/62chDkSL/20220123-202238.jpg) (https://postimg.cc/62chDkSL)
-
My first Truck.
-
made a trailer for the k100
(https://i.postimg.cc/rzNvZZwR/pup-trailer2.jpg) (https://postimg.cc/rzNvZZwR)
-
A quick progress report on the little k100 daycab:
(https://i.postimg.cc/bsbgb3c2/20220518-213030.jpg) (https://postimg.cc/bsbgb3c2)
back of the cab, showing some custom work on the air cleaner and battery box:
(https://i.postimg.cc/Pp9bv8S4/20220518-213132.jpg) (https://postimg.cc/Pp9bv8S4)
and last but not least, the sound system i went with:
(https://i.postimg.cc/4HC5FFrt/20220519-210826.jpg) (https://postimg.cc/4HC5FFrt)
this is a Dasmikro micro sound unit. based on youtube videos, it sounds alot like the gtpower. if you look closely it is servo taped to the side of the ESC, and the red a nd black wires lead around to the front of the ESC where the mini speaker is located. it connects to the throttle output of the receiver, and an aux channel. using the aux channel allows you to select alternate sounds, like a horn.
-
I have now started on my third 1/14 truck, a mostly stock Globe Liner. It will be finished with a DasMikro sound system and a Lesu sound system, it is using the stock motor, and a hobbywing brushed ESC.
(https://i.postimg.cc/gXrNgtkN/20240214-221121.jpg) (https://postimg.cc/gXrNgtkN)