Model Boat Mayhem

Technical, Techniques, Hints, and Tips => Detail Work, Rigging, Fittings, Figures Etc. => Topic started by: macy on March 18, 2008, 08:06:58 pm

Title: 1/12 scale driver figure.
Post by: macy on March 18, 2008, 08:06:58 pm
Hi all,
  I'm presently working up a 1/12 scale Notre Dame hydro. this is the G.Finlay plan up-scaled.
The problem I'm having at the moment is locating a driver figure that has arms, I'm not bothered about the lower body.

There's lots of Aero pilot figures available, nice and light too but no arms. Since the cockpit now has instrument dials and a lovely vintage four spoke wheel, I really would like the figure to have arms.
  So if anyone can point me in the right direction, that would really float my boat.

                     Cheers all........................Macy. O0
Title: Re: 1/12 scale driver figure.
Post by: Bunkerbarge on March 18, 2008, 08:24:22 pm
Some of the best figures in 1/12th are the very old Tamiya pit crew figures that were designed for thier range of 1/12th formula one cars.

They have been out of production now for a long time but you still se them quite regularly on Ebay.  I have seen them used on a couple of boats but the crab boat below is one of the nicest examples.
Title: Re: 1/12 scale driver figure.
Post by: DickyD on March 18, 2008, 09:07:50 pm
Think you might have to adapt another figure.
George Turner does 1:12 lifeboatmen amongst others.

http://www.georgeturnermodels.com/index.php?page=shopping&shop_cat_id=63
Title: Re: 1/12 scale driver figure.
Post by: Bunkerbarge on March 18, 2008, 09:29:21 pm
Here's one although unfortunately in Hong Kong.  They do crop up in the UK as well:

http://cgi.ebay.co.uk/Tamiya-1-12-F1-Mechanics-Figure-Figurine-model-Kit_W0QQitemZ180117278271QQihZ008QQcategoryZ1189QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem
Title: Re: 1/12 scale driver figure.
Post by: Tester on March 19, 2008, 07:51:47 am
Hi

You could try Classic Hydros at http://classichydros.com/drivers.htm (http://classichydros.com/drivers.htm) or Hansen Racing at Offshore Electrics http://www.offshoreelectrics.com/products.php?cat=21 (http://www.offshoreelectrics.com/products.php?cat=21)

This is the Classic Hydro figure

HTH
Richard
Title: Re: 1/12 scale driver figure.
Post by: macy on March 19, 2008, 03:37:20 pm
Hi all,
    Great stuff guys, I managed to get the figure from Classic Hydros.com, as suggested by Richard (TESTER).
 
Only £10.25 inc post, it's got arms and its lightweight too "what a bonus". Thanks again for all your help.

                  Cheers.......................Macy.

P.S. On completion I will post some pics
Title: Re: 1/12 scale driver figure.
Post by: tigertiger on March 19, 2008, 03:42:44 pm

P.S. On completion I will post some pics

Post some of your build as well. :D
A lot of people would be very interested in this. :)
Don't worry if you have already started, show us what you have got. 8)
Title: Re: 1/12 scale driver figure.
Post by: macy on March 20, 2008, 05:44:41 pm
Hi again,
       I'm afraid I don't have many pics sorted out yet, but I will post them in the near future along with a piece on the actual build. Anyway here's a few of what I have so far.
 1. Is the Allison 28 litre Aero engine used in these boats.All ex scrap box stuff.
 2. Is the unfinished underside 40thou thick magnesium sponson runners.
 3. Is the topside working up (about three coats here) seven in all.