Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[barriew]

I will need 3 Rope Reels as shown in the attached pic for my next project - Lulonga. This is a stern wheel river paddle tug from Africa. The plans were in Model Boats in 1995.
Does anyone know if these are available commercially - scale is 1:32 and the diameter of the reel is approx 23mm.

Barrie

[DickyD]

Nearest I can find   http://www.cornwallmodelboats.co.uk/acatalog/billing_boats_winches.html



F263 Hand Winch 25x10mm
Brass Hand Operated Cable Winch 25x10mm
Price: £4.61 (Including VAT at 17.5%)
Euros: €4.82 (Inc VAT) / US Dollars: $6.43 (Tax Free)

[barriew]

Thanks Richard - I will probably have to make them.

Barrie

[John W E]

Hi there

quick way of make cable rails

you need to go to a shop which sells poppers/snap fasteners/press studs    and buy a packet of them - the largest I have managed to purchase so far was from Ebay and they are 18mm diameter.

You use the bit of the popper which has the nipple fastened to it - you need two of these.

You then need a piece of wire insulation which forms the drum and this slips over the nipple on each end of the popper.

From copper wire you then make your stands - easily made by bending them in a 'V' shape - glue these either side to the poppers on the outside and hey presto......there is your rope reel.

See my scribble

aye
john e
bluebird

[gribeauval]

Go into the haberdashery shop and ask for sewing machine bobbins. They make metal and plastic versions with differing hole styles.

Mike

[barriew]

Thanks Bluebird and Gribeauval

I knew there was something that looked like the reels on the Dave Metcalfe original, but couldn't think what it was :)

Between the two of you I should now have enough ideas to be able to make these items, although I quite like the look of what DickyD found also

Barrie

[Proteus]

found these while looking about


http://quantrum.co.uk/redbankmodels/bscale-ship-fittings-cable-reels-c-61_68_276.html

Proteus

[barriew]

Proteus

Thanks but too small I think.

Barrie