Technical, Techniques, Hints, and Tips > Radio Equipment
Zebra 4 FM PRO
(1/1)
AlanP:
I have just acquired a Zebra 4 FM PRO Radio set, Part no HF 49/40 it has a 5ch receiver ZR-106SF. Can anyone tell me if it has BEC I can find nothing in the instructions. Would it do any damage if I tried it on BEC
Alan
malcolmfrary:
Even if a receiver has a BEC logo on it, I have yet to find a manufacturer who actually says what they mean, and what the performance of their BEC is.
Any RX intended for use with a separate RX battery will also work with a BEC, either a separate item, or one built into an ESC. Have a look at Ghosts diagrams at the top of this section.
AlanP:
Thanks for the reply malcolmfrary. I didn't know that any receiver could be used with an ESC that had BEC. :embarrassed:
So just to make sure I have understood you correctly.
My 4 ch setup would be 3 servos, a Viper Marine ESC and no receiver battery. The receiver taking it's power from the main battery through the ESC
Thanks again Alan
FullLeatherJacket:
Further info here:
http://www.action-electronics.co.uk/pdfs/BEC.pdf
FLJ
Navigation
[0] Message Index
Go to full version