Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[pipercub1772]

Hi i have a Anton small gas tank  2"dia x 2"vertical, Can anyone help with the nut and cone and pipe size for the Anton gas valve my usual  3/16" is to large and also anyone in the uk that could supply nut and cones and pipe to fit or any type of reducer to get around the problem Kind regards Allan.

[DBS88]

Allan you could try Jerry at Clevedon Steam, I have found him to be both very knowledgable and helpful about different manufacturers threads and fittings and he will even make up a special fitting for you if need be.

[KBIO]

Hello!
Below is the type of fitting that you need to connect an Anton gas tank.
The pipe supply is a 2mm one. Brass or copper do the job.
Note: never use an 0'ring on the burner itself. Generally it is a 5x50 mm or 6x75 mm type with a metallic cone => Metal against metal on the burner.
They are very easy to machine down if a friend can do it for you.
Put a pic of your tank, it will help !
Good luck!
Regards.

[pipercub1772]

Thanks for both replies  being 76 I'm not good at all with uploading pictures and thanks for the diagram ill try and obtain something of that size,
Kind regards Allan.